Feb 05

Although during the past 2 years, the waste management and environment protection proposals GN produced are occupying larger and larger share of all GN products, the traditional application GN Solids Control has been professional in has not lost it’s advantages. Recently, just when the oil and gas industry is picking up, GN’s international market is coming up again and a UAE client just purchased a 350GMP mud recycling system from GN Solids Control.
GNMS series mud recycling systems are one of the best seller products among all GN products, during those years, especially the 500 GPM mud recycling systems. In some jobsite, the 350 GPM mud system could serve as 500GPM mud recycling system, too.
This mud recycling system is combined by 2 phase separation equipment, plus a mixing unit. Depending on the limited space request on client’s jobsite, and also taking into consideration the transportation, the desander cones are not used in this system. For the first 2 level of separation, GN designed a double deck shaker, the lower shaker deck is served as shale shaker, with coarse meshes, .while the upper deck shaker is under the desilter cones, playing as the drying shaker for desilters.

GN Shale Shakers

GN DOUBLE DECK SHAKER

GN DOUBLE DECK SHAKER

On the other side of the tank, there is a mixing hopper, which is a common component of a mud recycling system for HDD projects. It is used to add and mix some necessary chemicals into the drilling mud.
Each year, GN Solids Control produces tens of mud recycling unit to the non-oil and gas industries, mostly for HDD, CBM, Water well drilling, TBM and Piling. All such mud systems could be grouped into 2:
1. Self-contained mud recycling systems with larger mud capacity and a mixing unit. Those systems, in application, are mostly used for HDD, CBM and etc. Normally, clients use a slurry pump to transfer mud from mud pit to this system and use mud pumps to suck out mud from the system.
2. Compact mud unit, without a mixing unit, mostly used for piling and TBM.

Share

written by shale shaker \\ tags: , , , ,

Nov 24

The service companies or project contractors are always very strict on choosing equipment manufacturers, because a good manufacturer is not only about the image and reputation, the more important thing is, the good performance of the equipment. Like for the oil and gas drilling, working on the rig means continuously operating and any unexpected failure comes at big cost.
In many projects which are in need of separation works, the shale shakers play a very important role. For example, in oil and gas drilling solids control projects, the shale shaker take over more than half of separating work, and in HDD or TBM projects, a shaker is always the first or even only separation step, even in drilling cuttings waste management projects, a high-G shaker with a 8.0G force are head in the queue.

GN NEW ORDER FOR SOLIDS CONTROL EQUIPMENT

GNZJ series shale shakers have following features:
1. High G force to ensure a good performance and good separation results. With Italy brand Oli as professional vibrating motors, GN shale shakers could reach a G force up to 7.5, and according to the jobsite condition, this G force is adjustable.
2. A strong structure of shaker deck made of stainless steel, instead of normal steel. Only a strong structure could endure the high G force vibration. That’s why GN shale shakers have a longer service life.
3. API RP 13C shaker screens with composite material frame. GN now make all its frame screens with composite material frames, it has a longer service life than steel frame ones, and the conductance is much larger. With same screen area, the unblocked area is much larger than steel frame ones.
Those above mentioned are only several features and advantages of GN shale shaker and shaker screens, since space here is limited, if you need more information about GN company and products, welcome to visit our website or contact us by email, telephone or fax directly.

http://www.gnsolidscontrol.com/application
In most of countries in the world, environment protection is very important for all industries with very strict laws. For the drilling projects, the separation standard is evens more. That’s why, GN became one of the most well-known brands during past years and its adjacent countries for the ideal separation solutions in oil and gas drilling industries and other drilling projects like HDD, TBM and etc, and even for the construction works.

Share

written by shale shaker \\ tags: , , , ,

Aug 11

In the first week of September 2017, the SPE Offshore Europe Conferences and Exhibitions will be started in Aberdeen, Scotland. Although the oil reserve and exploration in Europe is not so significant as other regions in the world, the oil and gas technology never left Europe behind, especially the Scotland, from where lots of leading technologies and professional engineers come.

GN attend SPE in UK

see GN Solids Control in Aberdeen, UK

The SPE Offshore Europe Conferences and Exhibitions is expected to attract more than 50000 attendees, so it is more or less a chance to exchange information and ideas. Keep pace with the most advanced technology is also what GN Solids Control always does. In the past years, GN Solids Control has developed from a professional solids control manufacturer into an expertise in separation solutions provider. GN Solids America and GN Solids Russia, together with GN Solids Control are winning shares in more than 70 countries and regions in the world.
GN Solids Control’s product line including:
1. Traditional solids control solutions and mud systems for the oil gas drilling, HDD drilling and TBM, including the shaker, mud cleaner, desander, desilter, decanter centrifuges, and various pumps.
2. Separation solutions for other industries, including the drilling cuttings waste management systems, drilling fluid waste management solutions, oily sludge separation systems, and the coming-soon TDU. Those systems combines the 2 phase separation, and oil water separation solutions, which cover most applications in this field.
3. Shaker Screens for all GN shaker models and other famous brand shakers. GN’s composite material frame screens are of leading quality and performance, which was proved with API RP13C standard, of high conductance.
For this SPE, GN will bring to exhibition high quality composite material frame screens, and GN sales team and head management will attend this exhibition. GN Booth information:
Stand: 5A25 in Hall 5
Exhibition Address: AECC (Aberdeen Exhibition & Conference Centre), Exhibition Avenue, Bridge of Don, Aberdeen, AB238BL, In Aberdeen, Scotland, UK
Exhibition time: September 5th to 8th.

Share

written by shale shaker \\ tags: , , , , ,