Nov 04

Just last week, GN Solids Control has finished a compact mud recycling unit, with full steps for separation for one of the largest oil giants in China. This system is to be transported to the jobsite by end of this year.

This system has 4 steps of separation, including:

1. GNZS703F. Shale shakers are always the first step for separation, because of GN shakers’ high G force and accurate API complied shaker screens, this shale shaker can efficiently separate out all particles larger than 100 microns, there in hence to help with prolonging the service life of the centrifugal pump after the shaker.

2. GNZJ703F-1S8N Mud Cleaner. Mud cleaner is a combined machine of desander and desilter, at a smaller foot print. It uses interchangeable shaker screens as GNZS703F, 2 centrifugal pumps are used to feed the desander and desilter respectively.

3. GNSP series Centrifugal pumps are also GN’s own products. For material choosing, GN used the high quality anti-weary material as pump body material by hard ductile iron alloy, and the main pump body is thicker than other manufacturers’. All GNSB series centrifugal pumps are using stainless steel mechanical seals.

4. Tank and skid for above mentioned equipment. Above mentioned equipment are located as 2 blocks. One block is a skid with lifting and anchoring corners just as a 20ft container, and the shale shaker and mud cleaner are located in the skid during transportation and operation. That design facilitates the operator for transportation or lifting the whole skid onto a tank, no to adjust each equipment or pipeline’s position.

5. A tank with compartments are designed to storage the mud from the shaker and from the desander/desilter. On below the tank, there are some slots for installing the centrifugal pumps. The whole outsize of the tank is also same as a 20ft container with container corners for lifting.

GN mud recycling system

GN mud recycling system

 

 

 

Besides the shale shaker and mud cleaner, there is another block for the dewatering centrifuge, please contact GN Solids Control for more information or wait for next week’s blog.

Share

written by shale shaker \\ tags: , , , ,

Jun 03

Vacuum pumps are GN’s new design and new products for the oily sludge transportation. Besides oily sludge, it could also handle many other kinds of materials like the sand and small rocks from construction, the drilling cuttings from the solids control system, industrial waste, animal waste, mud tank bottom sludge, and industry slurries. Take the big pump model as example, the GNSP40A, It could handle the particles with large size up to 50mm and with solids content up to 80%.That’s why it is also called solids pump.
Ever since GN built the first set of vacuum pump and put it into market, it gains lots of eyeballs. Till now, all vacuum pumps the GNSP40A’s and GNSP20A’s have been sold out. New orders are coming all over the world, and the coming 12 sets which are scheduled to be ready by end of June are already purchased by some clients. GN Solids Control is planning to produce more as stock to matching the demands of clients.
Why could those pumps become so popular?

vacuum pump

vacuum pump

1. Cause it is suitable for the applications faced by the operators. For example in the oily sludge, there are always lots of particles which are large for normal pumps and also it is of high viscosity. This vacuum pump could handle the comparably bigger particles with high solids content.
2. It is suitable for Explosive Proof standard, even for IECEX/ATEX Zone 1. Cause it is all mechanical equipment, no electric components applied, it is fully explosive proof.
3. It could suck the material from 100 meter away and discharge it to around 1000 meter away. That’s why some operators are using it to transfer liquid from a hole deep into underground with an opening from ground.
4. Small in size and easy for transportation. The GNSP20A and GNSP10A are portable with wheels, total volume smaller than 2 cubic meters.
5. Powerful, which is the last and most important feature.
Those 2 vacuum pumps are of model GNSP40A, with a large capacity of 40cbm per hour. They are just ready for being delivered to a UAE client.

Share

written by shale shaker \\ tags: , , ,

Apr 19

In next month, before the voting of Malaysia, the Trenchless Asia 2018 will be held in Kuala Lumpur Exhibition Center. Although under the light of big event like voting, the Trenchless Asia still keeps its radiation and will attract visitors from Asian countries. Trenchless Asia is scheduled on each other year and this year’s Trenchless Asia will be the 10th. This exhibition is not big but very professional and international.
Who will come to Trenchless Asia to show their equipment?

VISIT GN AT TRENCHLESS ASIA

  1. Rig manufacturers like Vermeer, Delong, TANGXING, Goodeng, Hecklech, and etc, many traditional rig brands and newly developed ones are attending this exhibition, some even bringing their big rigs on open yard exhibition.
  2. Other equipment and parts which are widely used in those industries for horizontal directional drilling, tunnel bored drilling, pipe jacking and etc, like the mud recycling systems, chemicals, pipelines, valves and etc. GN Solids Control, as the leading manufacturer for mud systems in China and one of the most famous brands in world, will bring its new product and high quality screens to exhibition.
  3. Service providers in the industry like the drilling contractor, chemical labs, slurry treatment and transportation contractor and etc.

What is GN Solids Control’s advantages in Trenchless Industry?
Mud systems or Desander Unit are one of the 3 main applications GN Solids Control’s products are used for. GN has a wide product range which could be combined as compact mud recycling unit, or 2 or 3 phase mud separation unit, with or without mud mixing unit, or even equipped with a decanter centrifuge and a dewatering unit.
GN Solids Control makes the same standard equipment for Trenchless Industry as durable and high quality as equipment for the oil and gas industry, and GN Solids Control’s equipment have been exported to more than 70 countries and regions in the world.

Information of Exhibition:
Location: Kuala Lumpur Exhibition Center, Malaysia
Time: May 7 to 8th, 2018.
GN Booth: No. 26.

Share

written by shale shaker \\ tags: , , , ,

Mar 10

In next week, since March 14th to 16th, from Wednesday to Friday, AOG 2018 will be held in Perth, WA, Australia. AOG is short for Australia Oil and Gas Exhibition and Conference, and it has been held for many years in Perth, one of the oil center of Australia. GN Solids Control has been exported mud recycling systems and equipment to Australia for many years. This time GN Solids Control is not attending AOG directly, GN Screen sample will be shown at TENSA’s booth and GN brochures also available there.

GN light weight mud system

Light weight mud tank system

TENSA Equipment is an oil service company located in Australia, who provides different services, oil and gas drilling related equipment and turn-key solutions to clients in domestic Australia and also from adjacent countries like New Zealand, New Papua Guinea and etc. Last year, TENSA Equipment worked on a light weight mud system which was requested to be transported by helicopters, and that was also a start of cooperation between TENSA Equipment and GN Solids Control. Both parties were happy with this cooperation and in this coming Exhibition, although GN is not coming directly, TENSA would like to help with some introductions.

Following are some information about the AOG 2018 and TENSA’s Booth:
Links about TENSA’s booth: https://tensaequipment.com.au/visit-tensa-at-aog2018/
Time of Exhibition: (AOG) 2018 from Wednesday 14 to Friday 16 March
Location of Exhibition: at the Perth Exhibition and Conference Centre (PECC). Perth City, WA, Australia
TENSA’s Booth Number: J1

At TENSA’s booth, GN will show a composite material frame screen. It is a composite material frame screen produced with new technology. For employing new technology into screen production, GN established a separate screen workshop and invested on cutting and welding robots, which enabled the automatic producing line for screens. Comparing with manual production, the robots are more easily and precisely controlled. Therefore, screen quality is much better.

Share

written by shale shaker \\ tags: , , , , ,

Feb 11

Each year, GN Solids Control produces and provided more than 200 sets for shale shakers for drilling rig solids control systems in more than 70 countries and regions in the world. Some equipment are exported together with GN’s system, some are exported separately to replace the old ones for existing system, or when clients are building tanks locally.

GN Shale Shaker System for Australia
Recently, just in last month, GN Solids Control has shipped a complete mud solids control system to an Australian drilling company, and this system now is approaching the destination port in Australia, and is schedule to be put into use in early March. Besides the basic functions a solids control system could provide, this system for Australia must meet some extra requests specific to Australia and New Zealand projects, like the cable laying rules, the distances between each stair and etc. GN Solids Control has an engineer team with rich experiences and a strict QC department to survey the producing procedure and final products, that’s why clients are always happy with GN. In the past years, GN has provided to Australia and New Zealand many systems, including but not limited to following typical ones:

1. Webster drilling’s solids control system, which was fabricated by GN Solids Control years ago.

2. A helicopter lifting system with accurately calculated weights for each tank unit.

3. A 400BBL system with 2 mud tanks and 1 mixing hopper skid with limited height and minimum storage capacity.

And in HDD industry, GN Solids Control has delivered more than 30 sets of complete mud systems to Australia and GN Solids Control is the most famous Chinese brands, and one of the best known among international brands.
Shaker screen is another popular product GN provides to Australian market. Last year when GN upgraded the screen producing line and started to make all frame screens with composite material frames.

Share

written by shale shaker \\ tags: , , ,

Jan 30

Just after GN Solids Control successfully brought out the powerful vacuum pump with a 40 cbm per hour transporting capacity, GN just released another vacuum pump, with smaller footprint and more portable than last one, with a treating capacity optional at 10 cbm per hour or 20 cbm per hour.

powerful pump for slurry transferring

GNSP Slurry Pump

A vacuum pump is quite suitable for the sludge transferring. It could transfer the material with solids content up to 80%, that’s why it is also called a solids pump. It could be used for different applications and job conditions including but not limited to:
1. Drilling cuttings from the solids control system, like the shale shaker, mud cleaner and etc.
2. It could be used for the drilling mud transportation.
3. For the drilling waste pit cleaning work, when transferring the pit bottom material.
4. Tank cleaning, like the crude oil tank cleaning, frac tank cleaning and etc.
5. It is quite suitable for oily sludge separation systems for the high density and high viscosity material transferring.
6. Animal waste transportation.
In a word, this vacuum pump is suitable for quite comprehensive industries, because of its several features:
It can handle large particles: with particle size up to 50mm.
High density: up to 80% solids content.
Long distance: this pump could suck material from 50 meters away and transfer to 500 meters’ distance.
Besides its powerful performances, it is also a safest solution. It is fully air operated. During operation, there is no need for electricity in the whole procedure. That’s why it could be used in Zone 1 area. Inside the pump, there’s no movable part. By using an air compressor of different air supply capacity, this same model GNSP-20A vacuum pump can give 2 different transferring capacities, respectively 10 cbm per hour and 20 cbm per hour.
Cause each jobsite has a different layout design. Client could choose a fixed pump or a portable one. Comparing with the GNSP-40A, the larger vacuum pump, this portable GNSP-20A vacuum pump equipped with wheels is more popular than the fixed one.

Share

written by shale shaker \\ tags: , ,