Jun 26

Tomorrow, on June 27th, the yearly MIOGE will be started at Crocus Expo, in Moscow. Russia is ranked as the second largest oil reserve owner in the world, and the MIOGE is the yearly largest oil show in Russia. Every year, this oil show gained attention from all over the world, the oil service companies, drilling contractors, drilling rig manufacturers and other equipment manufacturers all gather in Moscow for business and opportunities.

MIOGE
GN Solids Control has been working with Russia for more than 7 years, and solids control equipment with brand of GN Solids Control has been well known not only in Russia, but also in other Russian spoken countries. And the equipment GN exported to those countries cover all GN product range including:
1. Solids control equipment and systems including GNZS shale shaker, GNZJ desander, desilter, and mud cleaner, GN degassers, GNJBQ series mud agitators, GNNJQ series mud guns and various pumps.
2. GN Waste Management Equipment and systems, including GNLW decanter centrifuges, GNZS HGE drying shaker and GNCD vertical cuttings dryers. And also GN dewatering units are popular in Russia.
3. GN Shaker screens for GN own brand shakers and other brand shakers. GN’s most popular screens are GN composite material frame screens.
For this year’s MOIGE, GN Solids Control will show following equipment:
GNLW594E Shale Shaker, GNLW363G-VFD Decanter Centrifuge, GNZJ594E Mud Cleaner, GN Centrifugal Degasser, and various shaker screens GN produces.
Information about the exhibition:
Exhibition Name: MIOGE 2017
Exhibition Time: from June 27th to June 30th, 2017
Location: Crocus Expo, Moscow
GN Booth Number: A239, Hall 13, Pavilion

If you have to miss this oil show, and still want to contact GN, welcome to visit our website at www.gnsolidscontrol.com, and contact GN Solids Control in China or GN Solids America in Houston.

Share

written by shale shaker \\ tags: , , , , , , ,

Jul 08

Shale shaker is the primary solids control equipment in drilling water recycling system used to may help drill cuttings from water. For most of the drilling website, at least two units shale shaker will be equipped: one particular for working while the various other one is for back up, or maybe both are for working reason. Some sites even have to have three or four unit shale shakers which could handle a larger circulation rate. A tandem shale shaker is designed for easy putting together and disassembling onsite. It will always be convenient for transportation whenever moving the rig.
How exactly does Tandem Shale Shaker Do the job?
The tandem shale shaker is a design of put a couple of unit single shale shakers on a skid. These a couple of unit shaker are absolutely same for easy surgery and maintenance. As the drilling water treated by the shaker system finally will go through the line mesh shaker screen and give way to the under located mud tank, the skid was made with 2 square spaces from where the drilling water could fall into the mud tank. Both shaker sections are equipped with buffer box, some sort of provided mud distributor, regardless of pipe type or package type; the drilling water could be guided to the two shakers for separation practice. It means a tandem shale shaker could handle the particular flow rate 2 times than the usual single shaker. If you want make use of this tandem shale shaker regarding smaller drill rig, you may only run either one within it and the other one is utilized in case any break down for the first unit.

160629 tandem shale shaker
What are the great things about Tandem Shale Shaker?
one Tandems shale shaker could possibly be used flexibly as per the drilling fluids flow rate.
2 . not Convenient transportation as the skid is designed with container kind fixing point so that the complete skid could be easily placed on a flat bed trailer to some where you want.
3. Easy installation along with dismount. The operator really only need use a crane to pick up the whole skid to put about the tank and take off.
That tandem shale shaker is perfect for a very big drilling organization in Middle East. “GN’s equipment is always working great. This makes our mud manufacture very happy. That is why we place repeated order to them. ” Says a director only at that drilling company. Actually, this provider is GN’s old customers and very good friends.
Besides the Duo shale shaker unit, this kind of client also ordered an abundance of centrifugal pumps, mud agitators and mud guns via GN. These equipments they fit orderly in GN solids control’s assemblage workshop, which is really eye catching. Clients need to be well confident by good machine effectiveness. Obviously, for this clients, GN did it.

Share

written by GN Shale Shaker \\ tags: , , , ,

Jun 21

We have stock over 10 sets Vertical cuttings dryer in stock for sale from last year. As the going down crude oil price, quite a few drilling rigs stop working and the requirements for solids control equipment and drilling waste management equipment reduce a lot subsequently. To clear the stock equipment, the vertical cuttings dryer is on sale now.

 

Vertical cuttings dryer is key equipment for drilling waste management, which can be installed in on shore rig site, offshore rig site, drilling waste management station workshop, mud plant etc. The vertical cuttings dryer can treat the drilling waste liquid containing particles around some hundred microns. It mainly used to treat the drilling cuttings waste discharged from shale shaker, some hundred microns cuttings inside the drilling waste. For the drilling waste discharged from mud cleaner or decanter centrifuge, the vertical cuttings dryer cannot treat that. Because the vertical cuttings dryer screen basket opening have 0.5mm, 0.35mm and 0.25mm for available, that means 500microns, 350microns and 250microns. If the solids in the drilling waste is smaller than 500microns, the treating capacity of vertical cuttings dryer will not that good. This means nothing can be separated by vertical cuttings dryer.

2015.12.02_vertical_cuttings_dryer

Draw a conclusion: pls don’t feed drilling waste discharge from mud cleaner and centrifuge to vertical cuttings dryer, you can get nothing and just block the screen basket opening.

 

GN Solids Control vertical cuttings dryer have been working for the oil drilling field for over 3 years. The stable working performance, lower maintenance cost and easy operation give good reputation for the unit.

 

Except for the vertical cuttings dryer, the client generally need decanter centrifuge working together after the vertical cuttings dryer. The high speed decanter centrifuge with 3200RPM bowl speed can separate the fine solids from the drilling mud, thus to lower down the mud gravity and mud density. After decanter centrifuge, the clean drilling mud can go back to active mud tank system for reuse.

Share

written by GN Shale Shaker

Apr 20

On March 29-31, GN Solids Control successfully attended the global biggest oil equipment exhibition —“2016 CIPPE Exhibition”.

At the exhibition, the products of GN Solids Control experienced the “word of mouth marketing”, let us know more about it in detail.

Now the international crude oil price is low and all the companies in the oil industry are suffering, but that does not mean they will compromise to product quality though they need low cost product.

Now in the world, lots of customers don’t like to use the products made in China, as the product quality they think is bad though the price is low. They would prefer to use theproducts with high price made in Germany, America and so on, as the product have good quality.

At this exhibition, 1 customer from Phillipines has the need with the solids control equipment like shale shaker, centrifuge, mud cleaner, but as they used the relative equipment from another manufacture of China before, the result proved to be disappointed.

CIPPE 2016

CIPPE 2016

This time they came to attend the “2016 CIPPE Exhibition” and tried to find other suppliers, but they are still doubtful duo to the previous experience. They came to the booth of GN Solids Control and looked at the products of GN Solids Control.

The customer looked at the Shale Shaker, Centrifuge, Vertical Cuttings Dryer, Vacuum Degasser , during the communication between the customer with the salesman of GN, the customer asked lots of sharp questions.

Compared with the salesman, they are more willing to believe the other customers.

GN Solids Control has one customer from France and has purchased GN’s products before. This time, the customer came to attend the exhibition and want to place another order on GN Solids Control.

Facing the doubt and sharp questions from the Phillipines’ customer, this France’ customer shared the personal experience and said GN’s products are believable!

The France’s customer gave a detailed comparison between the products of GN Solids Control and other similar manufactures in China. Finally, the Phillipines’ customer showed the trust and interest on GN’s products.

Compared with the salesman, customers are more willing to believe what said by the other customers.

This is the “word of mouth marketing” experience with GN Solids Control!!

Finally, if you have any need with the products used for solids control and drilling waste management, welcome to visit our website and contact us at any time.
Web:http://www.gnsolidsamerica.com
Email:usa@gnsolidscontrol.com

Share

written by GN Shale Shaker \\ tags: , , , , ,

Mar 01

GN Solids Control (with another US brand and corporation, GN Solids America) can be a leading manufacturer for drilling waste management system. GN brand drilling waste management equipment and system are offered to over 60 countries along with regions worldwide, including U . S ., Canada, Argentina, Brazil, Evening chill, Egypt, Algeria, Libya, Saudi Arabic, Iran, Iraq, Nigeria, Turkey, India, Indonesia, etc…
GN drilling waste therapy system are suitable to treat typically the drilling cuttings with rigs or in the waste mud pit.
Below is a basic idea of the treatment for greasy waste from drilling rigs or from oil improve industry.
Step 1: Oily sludge mixing tank, 1 tool
The oil waste through mud pit goes to the actual tank and it is mixed with substances. There is mud agitators loaded to the tank to stirring it the oil waste having chemicals. The chemical is employed to make the oil comes out from your waste. The oil, waste material and solids are easy to you are using layers after settle down. Solids through the tank goes to shaker to be treated. Liquid goes to oil drinking water separator.
Step 2: High R drying shale shaker one ea and Decanter centrifuge 1 ea. This step is designed for mechanical separation.
A 4-panel high G drying shaker is used in this step. Often the shaker is used to remove rough particles from the oil squander. The liquid will be more separated by the 1# decanter centrifuge. Solids phase by shale shaker goes to TDU for further dry. Liquid stage from 1# decanter centrifuge goes to dewatering unit and after that separated by high speed centrifuge.

mud recyling system
Step 3: Dewatering unit and also a high speed Decanter centrifuge 2# for remove the fine solids
Flocculants from dewatering model is mixed with the water from 1# decanter centrifuge. And then the mixture of compound and liquid goes to centrifuge 2# for treatment. Solids by 2# decanter centrifuge goes toward TDU. The Fluids via 2# centrifuge is mix of oil, water and modest content of ultra okay solids, they can go to essential oil water separator.

GN Solids Control is China primary manufacturer of mud solids control systems including mud mixsing system , mud cleaning system , mud recycling system, any question welcome to contract us.

Share

written by GN Shale Shaker \\ tags: , , , ,

Aug 04

As a sales for the China Top solids control manufacturer and one of the world top brands for solids control and waste management equipments and systems, most of my clients are professionals in this industry. From them I have learnt a lot of knowledge in this field.

But sometimes, I am also asked questions like what is solids control and what the system used for, those questions are from my family or friends, sometimes from the clients who just enter this industry.

Simply speaking, when drilling rig is working, it need driling liquid to go into well to help lubricate the drilling bid and bring out drilling cuttings. And drilling liquid need to be recycled as much as possible. But before the drilling liquid enter to the system, the drilling cuttings should be separated out as much as possible.

Solids control system is used to separate out the cuttings, by means of 5 steps of clarification or separation, respectively:

  1. shale shaker, cutting particle larger than 100 microns

  2. vacuum degasser, the bubbles in mud are separated,

  3. desander cones for separating larger than 40 microns particles

  4. desilter cones for separating larger than 20 micron particles.

  5. solids control centrifuge

    SOLIDS CONTROL SYSTEM FROM GN

    SEE GN SOLIDS CONTROL EQUIPMENT

    , to recover barite and separate fine particles.

Pumps are used to transfer the liquid from one tank to next equipment, like the centrifugal pumps respectively for feeding the desander cones and desilter cones. Submersible slurry pump or screw pump are used for feeding the centrifuge.

Mud guns and mud agitators prevent the liquid from setttling to the tank bottom and in some cases, the mud guns also play a role as transporting the mud from one tank to another.

Jet mud mixer is used for adding new necessary chemicals into the drilling mud. And the jet mud mixer need centrifugal pumps to feed it.

GN can produce all above mentioned equipments and mud tanks, including the electric control for the complete system, for drilling rigs capacities ranging from 250HP to 3000HP.

Share

written by shale shaker \\ tags: , , , , ,