GN Shale Shaker

Offshore Technology Conference(OTC) in Houston

Founded in 1969, the Offshore Technology Conference is the world’s foremost event for the development of offshore resources in the fields of drilling, exploration, production, and environmental protection. OTC is held annually at Reliant Center in Houston.

OTC 2012 will be hold during 30th,Apr to 3rd May in Houston which will be the first time for GN Solids Control to take part OTC as the largest solids control equipment stand(108 square meters) in OTC.

GN Solids Control Breif Introduction

GN Solids Control is one of the leading manufacturer in China for solids control equipment focus on oil and gas drilling rig mud system and also Horizontal Directional Drilling(HDD)/Coal Seam Methan(CSM) drilling which with a same principle but details different on design and requirement. Shale shaker, Desander, Desilter, Decanter Centrifuge are the core eequipment for GN. GN is able to design and manufacture a complete solids control system based on clients special request.

GN other exhibition stand all over the world

Other than OTC, GN will take part in CIPPE in Beijing with a 250 square meters stand, Melborne trenchless exhibition with a 100 square meters stand,Adelaide 49 square meters stand hold by ADIA……. Please contact GN freely for more info

written by GN Shale Shaker \\ tags: OTC Exhibition, Solids Control System

At the CIPPE drilling show in March , GN show a total solids control system there . A turkey clients signed contact after the show on the spot for a ZJ40 solids control system and choose all GN shown equipments to combination a total solids control system in Turkey.

Here is the details of solids control equipments which was ordered by this Turkey clients:

1) 2 sets Shale Shaker GNPS703 for 660GPM capacity each
2) 1 set Mud Cleaner GNZJ703 for 1200GPM capacity
3) 1 set Vacuum Degasser ZCQ270 for 1200GPM capacity
4) 6 sets centrifugal pump SB8x6-13 for feeding cones and mixing
5) 2 sets mud hopper 750×750 for mixing and weighting drilling mud.
6) 6 sets mud gun NJQ50-3
7) Shaker screens and other spare parts

The tank was sold to a China clients and also they choose 2 units of same solids control system as the CIPPE drilling show. Each unit including :

1) 2 GNZS63-3 shale shaker for 518GPM capacity each
2) 1 GNZJ63-3 mud cleaner for 1000GPM capacity each
3) 2 sets of 45kw centrifugal pump to feed cones
4) 1 set of 7.5kw mud agitator for avoild silting
5) 1 set of GN jet mud mixer for mixing and weighting
6) 1 tank same size with CIPPE show 14mx2.6mx1.8m

At the same time , we received orders from other market like 2 unit of GN500GPM solids control system from Australia , 6 unit of solids control system equipments from China,3 sets of decanter centrifuge from Brazil, 1 sets of decanter centrifuge from Dubai and so on .
GN is becoming one of the leading manufacturer for solids control system in China. Wish they grown stronger and stronger to give solutions to all of their clients.

written by GN Shale Shaker \\ tags: Solids Control Equipment, Solids Control System, Solids Control System sales

Here we ‘d like to show you one set of solids control system for zj30 oil drilling rig .

The struchure of ZJ30 solids control system

The solids control  system consists of 3 mud tanks and equipments (1# shaker tank, 2# intermediate tank, 3#suction tank). The main beam of tank skid is welded by 250 H beam steel, and combined as integral skid-mounted together with the tank body. The thickness for tank wall is 6mm in all the solids control system and for base plate is 10mm. 30mm thickness grating is covered on top of tank and 168x168x×6mm round tubes (one side is to be used as clean water pipeline, the other side is to be used as pump discharge line) are furnished around tank top. The design of whole tank in the total solids control system can meet the requirements of hoisting assembly and dismantlement.  Clean water pipe lines (WP 0.5mpa), 3” mud gun pipelines (working pressure 6MPa). One 1” clean water valve is installed on the pipelines of each tank surface, backup used for diluting the mud and cleaning the equipments. Hose connection between intermediate-pressure mud gun pipelines and clean water pipelines in this solids control system.

The Flowline of solids control system

1) For the Solids control system ,The mud returned from wellhead can be treated gradually through mud return pipeline, distributor, shell shaker, degasser (when the mud contains air) and desander. In order to meet the special requirements of “pouring the mud”for solids control system, the mud returned from wellhead can flow into 1# – 2#, 3# tanks directly via mud ditch in the tank when necessary.

2) 2 sets of aggravated pump can suck mud from 3# tank. The aggravated mud can be discharged to 2#, 3# tank in the totally solids control system.

3) The shear pump can suck mud from 2# , 3#tank.

4) one 4” steel pipe is to be put onto the 2#, 3# tanks, the connection will be connected by customer.

Solids Control System is the mailly products in GN Solids Control , offcause with proffessional design and manufacture . We have exported to more than 30 contries for solids control system and equipmetns . Please feel free to contact us and we won’t let you down.

written by GN Shale Shaker \\ tags: Mud Processing System, oil drilling mud system, Solids Control System