Jun 26

Tomorrow, on June 27th, the yearly MIOGE will be started at Crocus Expo, in Moscow. Russia is ranked as the second largest oil reserve owner in the world, and the MIOGE is the yearly largest oil show in Russia. Every year, this oil show gained attention from all over the world, the oil service companies, drilling contractors, drilling rig manufacturers and other equipment manufacturers all gather in Moscow for business and opportunities.

MIOGE
GN Solids Control has been working with Russia for more than 7 years, and solids control equipment with brand of GN Solids Control has been well known not only in Russia, but also in other Russian spoken countries. And the equipment GN exported to those countries cover all GN product range including:
1. Solids control equipment and systems including GNZS shale shaker, GNZJ desander, desilter, and mud cleaner, GN degassers, GNJBQ series mud agitators, GNNJQ series mud guns and various pumps.
2. GN Waste Management Equipment and systems, including GNLW decanter centrifuges, GNZS HGE drying shaker and GNCD vertical cuttings dryers. And also GN dewatering units are popular in Russia.
3. GN Shaker screens for GN own brand shakers and other brand shakers. GN’s most popular screens are GN composite material frame screens.
For this year’s MOIGE, GN Solids Control will show following equipment:
GNLW594E Shale Shaker, GNLW363G-VFD Decanter Centrifuge, GNZJ594E Mud Cleaner, GN Centrifugal Degasser, and various shaker screens GN produces.
Information about the exhibition:
Exhibition Name: MIOGE 2017
Exhibition Time: from June 27th to June 30th, 2017
Location: Crocus Expo, Moscow
GN Booth Number: A239, Hall 13, Pavilion

If you have to miss this oil show, and still want to contact GN, welcome to visit our website at www.gnsolidscontrol.com, and contact GN Solids Control in China or GN Solids America in Houston.

Share

written by shale shaker \\ tags: , , , , , , ,

Sep 09

GN Solids Control is a world famous company and brand in the solids control and drilling waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge,  shear pump, cutting dryer, vacuum degasser, Mud Gas Separator  and so on. GN could be your one stop shop in the solids control and waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two more naming rules to you, agitator and mud gun. As these two products are widely used in the mud mixing system in the oil and gas drilling, there are more and more customers showing their interest in them. So understanding the naming rules is very important and could help you select the products effectively and efficiently. Let’s start with the agitator: GNJBQ075CD, GN means the company name in short. JBQ means theChines product name of the agitator in short. 075 means 10 times of the pump’s power. The pump power is 7.5KW.C means this product is the third generation, and in future, GN will make more upgrades and improvements for the pump, there will be D, E etc. and more versions coming out. D means there are two impellers on the shaft, this is specially used when the tank is too deep and the shaft needs to be long, and the impeller quantity needs to be doubled to make the mud even.

GN products

GN products

Next let’s go to the mud gun: GNNJQ50A-3G(X), GN means the company name in short, NJQ means the product name mud gun in short.50 means the nominal diameter is 50mm. A means it is the first generation. 3 means there are 3 nozzles on the mud gun. G means it’s fixed, X means it’s rotatory. Mud gun is widely used in the mud system to spray and flush the corner of the tank to avoid the solid collected in there.

That’s the basic introduction of the naming rules foragitator and mud gun. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

Share

written by GN Shale Shaker \\ tags: , , , , ,

Aug 19

GN Solids Control is a world famous company and brand in the solids control and drilling waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on. GN could be your one stop shop in the solids control and drilling  waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two naming rules to you, the vertical cutting dryer and the centrifugal pump. As these two products are widely used in the industry and they are the core products of GN’s products line, there are more and more customers showing their interest in this two products. So understanding the naming rules could help you identify the products effectively and efficiently. Let’s start with the cutting dryer: GNCD930C-VFD, GN means the company name in short. CD means the product name cutting dryer in short. 930 means the maximum diameter of the screen basket is 930 mm. C means this product is the third generation with more improvement than the previous two generations. VFD means variable frequency drive. This feature can make the operator change the speed of the screen basket and rotor according to the volume of the slurry.

GN products

Next let’s go to the centrifugal pump: GNSB8*6A-13J,  GN mean the company name in short, SB means the product name centrifugal pump, 8*6 means the inlet size is 8 and the outlet size is 6, A means it is the first generation of centrifugal pump. 13 means the impeller size. J means the pump is mechanically sealed. And there is another way for sealing, packing. There will be no indication if it’s that way sealed.

That’s the basic introduction of the naming rules for vertical cutting dryer and centrifugal pump. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

 

Share

written by GN Shale Shaker \\ tags: , , , , , , ,

Jul 26

Among all the famous brands of solids control in the world, the most famous ones are always from USA or from Europe. But now, there is a new brand becomes more and more popular, GN Solids Control, it is from China and the products are Made in China. GN Solids Control has changed the image of Chinese manufacturers in oil and gas industry with its high quality products and reassurance service, because ever since its establishment, GN Solids Control always set its value as Quality First, Price Second.

Now the products from GN Solids Control are exported to many countries and regions in the world even including the USA itself. In fact, GN Solids Control is competing with US brands in USA. Now more and more clients from USA and other North America are choosing GN brand because of the high cost-effectiveness. And GN equipment didn’t fail the end users, they helped them to win out in the industry.

160629 tandem shale shaker

At first, any Chinese brand is new to them and not trustable in their mind. But the good price were so attractive especially in the tough economic environment, so the client chose GN tentatively for only few sets. But later, when the equipment end user’s feedback came from jobsite, the client is sure about GN shale shaker’s performance and decided to buy more.

It is not a single case, in fact, lot of end users including the world famous giant drilling companies and oil service companies are turning to GN, consulting from GN for new solutions or configuration of equipment. Based on the jobsite condition and rich previous experience, GN could give some customized solutions.

Thanks to GN’s engineers hard work and rich experience and also thanks to GN clients’ support, GN improved the old models of equipment and not stop designing the new ones to deal with the more and more strict demands raised by the environment and new drilling technology. Like the newest generation of GNCD series VG dryers are suitable not only for oil based mud but also for water based mud by employing new material and design.

 

Besides the traditional equipment like shale shaker, mud cleaner, shear pumps, decanter centrifuge and vertical cuttings dryer, GN also bring in solidification unit and TDU. They would be pride of China, not only GN’s products, but also GN Solids Control itself.

Share

written by GN Shale Shaker \\ tags: , , ,

Jul 12

Shale shakers are first step separation for the solids control system for oil and gas drilling and other drillings. They are used to separate out particles larger than 100 microns by using shaker screens. For deep well drilling, the Tandem shale shakers are very common. They are 2 exactly same shakers to be installed on one skid.
Recently, GN has delivered to a middle east drilling company all necessary solids control equipment for 3 rigs’ package, including shale shaker, mud cleaner, mud agitators and mud guns ,and also mixing hoppers. The shale shakers for this order are tandem shakers. And the Shaker Model is GNZS594E-HB.

Tandem shale shaker

GN Tandem shale shaker

Advantages of GNZS594E-HB:
1. Patent design for the rubber sealing methods, effectively avoid leaking of mud during operation.
2. Stainless steel material as shaker deck bottom frame to endure the high G force from the vibration motor.
3. Italy brand vibration motors Oli for a strong G force available.
4. Adjustable shaker deck angle from minus 2 degrees to 5 degrees during operation with a wrench.
5. Special and new design for the screen changing method, to get the screens easily to change, more human oriented.
6. Shaker screens are composite material frame screens, for a longer service life and more HSE.
Such above mentioned features are same for other GN shale shaker models including GNZS703E, and GN mud cleaners and double deck shaker used for other applications like HDD, CBM and TBM and etc.

GN is also professional in shaker screens because:
1. As leading manufacturer of solids control shale shaker, GN knows better of shakers and accordingly, GN knows well what screens are more suitable for shakers.
2. GN has a separate factory especially for shaker screens, to better control the screens quality.
3. GN clients give feedbacks and improvement suggestions for update the technology
4. GN always use the most reliable materials for screens, and all GN products same.

Share

written by shale shaker \\ tags: , , , ,

Jul 08

Shale shaker is the primary solids control equipment in drilling water recycling system used to may help drill cuttings from water. For most of the drilling website, at least two units shale shaker will be equipped: one particular for working while the various other one is for back up, or maybe both are for working reason. Some sites even have to have three or four unit shale shakers which could handle a larger circulation rate. A tandem shale shaker is designed for easy putting together and disassembling onsite. It will always be convenient for transportation whenever moving the rig.
How exactly does Tandem Shale Shaker Do the job?
The tandem shale shaker is a design of put a couple of unit single shale shakers on a skid. These a couple of unit shaker are absolutely same for easy surgery and maintenance. As the drilling water treated by the shaker system finally will go through the line mesh shaker screen and give way to the under located mud tank, the skid was made with 2 square spaces from where the drilling water could fall into the mud tank. Both shaker sections are equipped with buffer box, some sort of provided mud distributor, regardless of pipe type or package type; the drilling water could be guided to the two shakers for separation practice. It means a tandem shale shaker could handle the particular flow rate 2 times than the usual single shaker. If you want make use of this tandem shale shaker regarding smaller drill rig, you may only run either one within it and the other one is utilized in case any break down for the first unit.

160629 tandem shale shaker
What are the great things about Tandem Shale Shaker?
one Tandems shale shaker could possibly be used flexibly as per the drilling fluids flow rate.
2 . not Convenient transportation as the skid is designed with container kind fixing point so that the complete skid could be easily placed on a flat bed trailer to some where you want.
3. Easy installation along with dismount. The operator really only need use a crane to pick up the whole skid to put about the tank and take off.
That tandem shale shaker is perfect for a very big drilling organization in Middle East. “GN’s equipment is always working great. This makes our mud manufacture very happy. That is why we place repeated order to them. ” Says a director only at that drilling company. Actually, this provider is GN’s old customers and very good friends.
Besides the Duo shale shaker unit, this kind of client also ordered an abundance of centrifugal pumps, mud agitators and mud guns via GN. These equipments they fit orderly in GN solids control’s assemblage workshop, which is really eye catching. Clients need to be well confident by good machine effectiveness. Obviously, for this clients, GN did it.

Share

written by GN Shale Shaker \\ tags: , , , ,