Aug 19

GN Solids Control is a world famous company and brand in the solids control and drilling waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on. GN could be your one stop shop in the solids control and drilling  waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two naming rules to you, the vertical cutting dryer and the centrifugal pump. As these two products are widely used in the industry and they are the core products of GN’s products line, there are more and more customers showing their interest in this two products. So understanding the naming rules could help you identify the products effectively and efficiently. Let’s start with the cutting dryer: GNCD930C-VFD, GN means the company name in short. CD means the product name cutting dryer in short. 930 means the maximum diameter of the screen basket is 930 mm. C means this product is the third generation with more improvement than the previous two generations. VFD means variable frequency drive. This feature can make the operator change the speed of the screen basket and rotor according to the volume of the slurry.

GN products

Next let’s go to the centrifugal pump: GNSB8*6A-13J,  GN mean the company name in short, SB means the product name centrifugal pump, 8*6 means the inlet size is 8 and the outlet size is 6, A means it is the first generation of centrifugal pump. 13 means the impeller size. J means the pump is mechanically sealed. And there is another way for sealing, packing. There will be no indication if it’s that way sealed.

That’s the basic introduction of the naming rules for vertical cutting dryer and centrifugal pump. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

 

Share

written by GN Shale Shaker \\ tags: , , , , , , ,

Jul 26

Among all the famous brands of solids control in the world, the most famous ones are always from USA or from Europe. But now, there is a new brand becomes more and more popular, GN Solids Control, it is from China and the products are Made in China. GN Solids Control has changed the image of Chinese manufacturers in oil and gas industry with its high quality products and reassurance service, because ever since its establishment, GN Solids Control always set its value as Quality First, Price Second.

Now the products from GN Solids Control are exported to many countries and regions in the world even including the USA itself. In fact, GN Solids Control is competing with US brands in USA. Now more and more clients from USA and other North America are choosing GN brand because of the high cost-effectiveness. And GN equipment didn’t fail the end users, they helped them to win out in the industry.

160629 tandem shale shaker

At first, any Chinese brand is new to them and not trustable in their mind. But the good price were so attractive especially in the tough economic environment, so the client chose GN tentatively for only few sets. But later, when the equipment end user’s feedback came from jobsite, the client is sure about GN shale shaker’s performance and decided to buy more.

It is not a single case, in fact, lot of end users including the world famous giant drilling companies and oil service companies are turning to GN, consulting from GN for new solutions or configuration of equipment. Based on the jobsite condition and rich previous experience, GN could give some customized solutions.

Thanks to GN’s engineers hard work and rich experience and also thanks to GN clients’ support, GN improved the old models of equipment and not stop designing the new ones to deal with the more and more strict demands raised by the environment and new drilling technology. Like the newest generation of GNCD series VG dryers are suitable not only for oil based mud but also for water based mud by employing new material and design.

 

Besides the traditional equipment like shale shaker, mud cleaner, shear pumps, decanter centrifuge and vertical cuttings dryer, GN also bring in solidification unit and TDU. They would be pride of China, not only GN’s products, but also GN Solids Control itself.

Share

written by GN Shale Shaker \\ tags: , , ,

Jul 12

Shale shakers are first step separation for the solids control system for oil and gas drilling and other drillings. They are used to separate out particles larger than 100 microns by using shaker screens. For deep well drilling, the Tandem shale shakers are very common. They are 2 exactly same shakers to be installed on one skid.
Recently, GN has delivered to a middle east drilling company all necessary solids control equipment for 3 rigs’ package, including shale shaker, mud cleaner, mud agitators and mud guns ,and also mixing hoppers. The shale shakers for this order are tandem shakers. And the Shaker Model is GNZS594E-HB.

Tandem shale shaker

GN Tandem shale shaker

Advantages of GNZS594E-HB:
1. Patent design for the rubber sealing methods, effectively avoid leaking of mud during operation.
2. Stainless steel material as shaker deck bottom frame to endure the high G force from the vibration motor.
3. Italy brand vibration motors Oli for a strong G force available.
4. Adjustable shaker deck angle from minus 2 degrees to 5 degrees during operation with a wrench.
5. Special and new design for the screen changing method, to get the screens easily to change, more human oriented.
6. Shaker screens are composite material frame screens, for a longer service life and more HSE.
Such above mentioned features are same for other GN shale shaker models including GNZS703E, and GN mud cleaners and double deck shaker used for other applications like HDD, CBM and TBM and etc.

GN is also professional in shaker screens because:
1. As leading manufacturer of solids control shale shaker, GN knows better of shakers and accordingly, GN knows well what screens are more suitable for shakers.
2. GN has a separate factory especially for shaker screens, to better control the screens quality.
3. GN clients give feedbacks and improvement suggestions for update the technology
4. GN always use the most reliable materials for screens, and all GN products same.

Share

written by shale shaker \\ tags: , , , ,

Jul 08

Shale shaker is the primary solids control equipment in drilling water recycling system used to may help drill cuttings from water. For most of the drilling website, at least two units shale shaker will be equipped: one particular for working while the various other one is for back up, or maybe both are for working reason. Some sites even have to have three or four unit shale shakers which could handle a larger circulation rate. A tandem shale shaker is designed for easy putting together and disassembling onsite. It will always be convenient for transportation whenever moving the rig.
How exactly does Tandem Shale Shaker Do the job?
The tandem shale shaker is a design of put a couple of unit single shale shakers on a skid. These a couple of unit shaker are absolutely same for easy surgery and maintenance. As the drilling water treated by the shaker system finally will go through the line mesh shaker screen and give way to the under located mud tank, the skid was made with 2 square spaces from where the drilling water could fall into the mud tank. Both shaker sections are equipped with buffer box, some sort of provided mud distributor, regardless of pipe type or package type; the drilling water could be guided to the two shakers for separation practice. It means a tandem shale shaker could handle the particular flow rate 2 times than the usual single shaker. If you want make use of this tandem shale shaker regarding smaller drill rig, you may only run either one within it and the other one is utilized in case any break down for the first unit.

160629 tandem shale shaker
What are the great things about Tandem Shale Shaker?
one Tandems shale shaker could possibly be used flexibly as per the drilling fluids flow rate.
2 . not Convenient transportation as the skid is designed with container kind fixing point so that the complete skid could be easily placed on a flat bed trailer to some where you want.
3. Easy installation along with dismount. The operator really only need use a crane to pick up the whole skid to put about the tank and take off.
That tandem shale shaker is perfect for a very big drilling organization in Middle East. “GN’s equipment is always working great. This makes our mud manufacture very happy. That is why we place repeated order to them. ” Says a director only at that drilling company. Actually, this provider is GN’s old customers and very good friends.
Besides the Duo shale shaker unit, this kind of client also ordered an abundance of centrifugal pumps, mud agitators and mud guns via GN. These equipments they fit orderly in GN solids control’s assemblage workshop, which is really eye catching. Clients need to be well confident by good machine effectiveness. Obviously, for this clients, GN did it.

Share

written by GN Shale Shaker \\ tags: , , , ,

Jun 27

Liquid Mud Plant
Typically the liquid mud plant is perfect for storage of drilling liquids. The mud plant comprise of mud tanks, mud agitators, shear pump and mud guns intended for storage and agitation on the drilling fluids. And usually, the mud plant could have one shale shaker and something decanter centrifuge pre-treatment with the drilling mud before maintaining it to the clean drilling fluids storage tanks. The whole mud tanks quantity can depends on the volume of the water mud pant.

Drilling Waste material Management Module
GN design and style a complete line of individual elements for drilling waste management, this include vertical cuttings dryer module, decanter centrifuge module, High Drying shaker module, drilling cuttings move module, cutting collection pack, drilling mud transfer component. This components can be linked with each other to be a complete drilling waste management system. It is extremely flexible and easy for transport.
GN Shale America
New developed drilling mud treatment equipment:
Dewatering system is chemically enhanced technological innovation to treat drilling fluids using Ultra fine solids to regain it to be a closed loop mud system with Zero discharge.
Drilling cuttings solidification unit, this really is one of the treatment unit with regard to Oil based and water dependent mud in an economic approach, it is also called drilling cuttings stabilization unit.
Thermal desorption unit is way to make use of heat up to over 400 M degrees to treat the oil-based drilling cuttings with oblique thermal desorption unit, right after treatment the vapor will likely be condensed to be clean essential oil and water, the solids will have only 0. 3% oil on the solids intended for discharge or construction stuff.

There are a lot of reasons for you to Pick GN Solids Control. Since the first and big solids control company from China, GN Solids America is able to provide you the quality drilling mud treatment products for you drilling solids control and drilling waste management equipment.

Share

written by GN Shale Shaker \\ tags: , , , , ,

Jun 27

GN Solids Control is not only the first API certified solids control company in China, but also, GN Solids Control is the first China solids control company who set up branch company and brand in Houston, USA, which is the center of solids control in the world.

GN shale shaker

GN shale shaker helps clients to win out

Now good news from GN Solids America, that GNZS Shale shaker in USA helps GN American clients to win out among his peers and they are giving good comments on GN equipment. You know, the most difficult thing for a Chinese brand to win is to be accepted by the clients at the very beginning. Whatever your equipment like shakers are good, at first, you have to be accepted by the client, then, could the client give a conclusion. This time, the end user is a local contractor in USA, and they provide solids control and dewatering solutions for many drilling companies. As the end user of solids control equipment at jobsite, they always know well about the importance of a good shale shaker and they have the first hand comments. They admit that at first when they chose GN Solids America was allured by the good price. When the price is competitive and performance is OK, they would win by half. But when they firstly tried GN Shale Shaker on their jobsite, the shakers’ performance was much better than they expected. So they continuously expended their need for GN shale shaker to 10 sets until now.

Shale shaker is the first phase of separation in a complete solids control line, and although in some incomplete solids control lines, end user many delete desander or desilter, but never a shale shaker, because the shale shaker is used to separate most of the drilling cuttings.

GN Solids Control’s shale shaker could give a good performance because:
1. Reasonable design of the equipment. For shale shaker, GN has 5 patents in design.
2. High and adjustable G force up to 7.5G to ensure a good separation result.
3. Stainless steel shaker deck to endure the High G force.
4. Durable longer service time shaker screens.
For best seller shale shakers, GN Solids Control, China and GN Solids America always have stock.

Share

written by shale shaker \\ tags: , , , ,