Jan 01

A busy year always seems more quickly than usual, just like year 2017 for GN Solids Control. Since the decline of the crude oil prices from late Year 2014, it has been winter for all related industries and a tough time for all drilling companies. But, still, there are opportunities and gains for the ones who are ready to provide the clients with high quality products at reasonable prices.

When there are landmarks on each year, then the year will become remembered easily, as the year 2017 for GN Solids Control.Look back upon the past years from year 2017, GN has gained many achievements. As a privately owned company, they are not easy to achieve those goals.
Year 2017:
March, 2017 in Beijing, CIPPE, GN Solids Control showed a fully hydraulic decanter centrifuge of 14 inch diameter bowl at CIPPE Oil Show. But the glary of the fully hydraulic centrifuge was shadowed by the GNLW764-VFD Decanter centrifuge which has a 30 inch giant bowl and a large length diameter ratio up to 4.
May, 2017, GN new screen producing line was put into use, and all frame screens were upgraded with the composite material frame and SS316 mesh cloths. And full range of GN screen models has been tested to comply with API RP 13C, with large conductance and unblocked area. GN Screens are receiving perfect feedback from jobsite tests among all end users.
September, 2017, GN’s vacuum pumps are receiving good feedback from clients’ jobsites, and GN executed a tougher test in factory with low liquidate material on GN 1st generation vacuum pump. The result was satisfactory. It means, the problem for drilling cuttings transferring is solved, and the vacuum pump could handle material with solids content up to 80%.
We believe, GN will do better in Year 2018. We will see.


written by shale shaker \\ tags: ,

Oct 20

Every year, at every beginning of new staff training, the drilling companies and oil service companies are talking repeatedly about the safety. And Deepwater Horizon is always a must-to-watch movie for everyone who is earning a life by oil and gas industry, no matter in the drilling, refinery or waste treatment industries.

Containers for safe transportation of waste

GN PLC Containers for safe transportation of waste

More and more facilities and equipment are designed to play a role to make the environment safer than before. Poor Boy Degasser plus Flare Ignition unit are two of them. GN Solids Control just delivered several sets of Poor Boy Degasser to the largest drilling company in China. And GN’s equipment to be chosen, one of the reasons is that because that GN Solids Control is certified by all necessary certificates like API, ISO, DNV CE and etc.
Furthermore, at this time GN Solids Control has newly designed another facility, for a safe transportation of the harmful or maybe harmful drilling waste. As is known, in some drilling waste, there are harmful gases in it. During transportation, such gas or sometimes liquid may leak out. It is dangerous for human being and affect environment. GN designed waste containers have following features:

1. Excellent sealing with silicon to make sure no leakage of waste.
2. On line monitoring system: on discharge port, there’s device for monitoring the leakage of oil and water. In order to protect operator, the container door could be opened without touching via a touchless switch.
3. Alarm for overload. A gravity sensor module is equipped to this tank, it will give alarm when the container is overloaded.
4. Easy connection with trucks. This container corners are designed as per 20 ft containers, and it is equipped with sufficient lifting points, locking devices during transportation and forklift holes.
For more information, pls contact GN website freely.


written by shale shaker \\ tags: , , ,