Aug 28

Abstract 

Few days ago we delivered customized well drilling mud equipments to Thailand. They are a rather big player on oil well drilling. The equipments including poor boy degasser, vacuum degasser, centrifugal pump, mud mixer. Glad to say, they are GN repeat customer in Thailand.

ZCQ240 Vacuum Degasser

ZCQ240 Vacuum Degasser

Details on drilling mud equipments

They use equipments to match their 800bbl mud system. So the detailed information on equipments are as following: ZYQ900 Poor boy degasser, ZCQ240 Vcuum degasser, SB5x6-14 Centrifugal pump, JBQ11 Mud mixer or mud agitator. The poor boy degasser usually used in deep oilwell drilling it is also named as “Mud gas separator”.

This Thailand customer is an oilwell drilling services company they has special requirements on the poor boy degasser. As we know they use the poor boy degasser in 800bbl total treating capacity system. They requested the vessel diameter should be 36″. A ladder on the side also need a 10ft U-Tube at least. The U-Tube is related with liquid seal or mud leg.

At maximum capacity, naturally more internal pressure will be created causing chance of overcoming liquid seal (mud leg). On the other hand when the unit is handling very little fluid, there is less possibility of overcoming the mud leg. They requested 10ft U-Tube is more appropriate for their actual requirements on the degasser( 220~300m3/h) for the whole mud system treating capacity.

The detailed specs of the poor boy degasser is as following

Model: ZYQ900 (Customized design)

Main vessel diameter: 36″ (910mm)

Treating capacity: 220~300m3/h

Mud inlet line: 5″, and 13’length

Mud output line (U-Tube): 8″, and 10′ length

Vent line: 8″, and 18′ length

Weight: 1800kg

Design code: PRC Petrol and Natural gas Industry Standard–SY/T5612-2007

Remark: This poor boy degasser with relief valve

Poor boy degasser

Poor boy degasser

Furthermore, they are in urgent demand on above drilling mud equipments. So they ship them by air. Then the mud gas seaparator must be designed as easy-air shipment. Actually, for this mud gas separator the transportation dimension is 1669L x 1669W x 5691H. Consider their shipment issue, our engineer designed this into 2 parts. Although we manufacture the customized nonstandard poor boy degasser we finished it just 1 week.

Of course also other items we did our best to satisfy the dimension requirements. Such as ZCQ240 Vacuum degasser, mud agitators. We also take customer’s freight cost in consideration we control the weight as little as possible. Finally, the poor boy degasser, centrifugal pump, mud agitators, vacuum degasser, also along with necessary pipelines, fittings, etc. accessaries were delivered on time and at high quality.

Effect on customized drilling mud equipment

This lot of mud equipments have been received and Thailand client felt satisfied with our customization design and circumspected service. They said they would expand GN high quality and excellent services in Thailand oil& gas drilling industry.

The drilling mud equipments will be always required to be customized according to clients’ actual situation, the drilling circumstance, drilling mud property. Customized mud equipments or system usually will be more difficult than the standard ones. However, GN will do the best efforts for customers’ satisfaction and realize their decreasing on drilling cost.

Share

written by GN Shale Shaker \\ tags: , ,

2 Pings to “Customized drilling mud equipments for oil drilling company in Thailand”

  1. Flow Line distributor for shale shaker Says:

    […] Customized drilling mud equipments for oil drilling company in Thailand […]

  2. Drilling fluid equipment Says:

    […] fluid equipments usually mean the equipments for drilling mud processing on various well drilling. The equipments are used on processing drilling fluid such as […]


Leave a Reply