Jul 02

Drilling Mud Tank Unit GN sold a 400GPM complete drilling mud tank unit to Korea for HDD and have finished commissioning and training to the buyyer.

Advantages of GN 400 GPM HDD Complete Drilling Mud Tank Unit Brief Specifications:

Output: Up to 400 USgpm (1500 litres/min)

Cut point: 16 microns (Final processing result)

Mud tank dimensions: 8000L x 2200W x 1800H(Including skid)

Mud tank capacity: 4500 US gallons

Sand pumps: Two 5x 4″ centrifugal pumps with 22kW motors

Mud mixing hopper:SLH150-35 with 30KW motor and hold mixing capacity 60m3/min

Mud agitator:JBQ7.5 Mud agitator provides more better performance mud

Drillling Mud Tank Unit power: Integral control panel for all electrical functions.

GN 400GPM drilling mud tank unit benefit:

1) Cost effective method of re-cycling drilling mud.
2) Reducing cost of supplying fresh mud.
3) Cut point of 16 micron removes particles which damage centrifugal pumps, whilst leaving the useful bentonite particles in suspension for re-use.
4) Reliable and durable design, based on engineers’ over 10 years of field experience worldwide. 
5)  Avoiding cost of disposing of liquid waste. 
6)  The discharge from mud cleaner is dramatically reducing disposal drilling costs.

GN have had some other models of drilling mud tank unit like 200GPM, 500GPM,800GPM and 1000GPM mud tank unit for HDD , CBM ,Diamond Drilling or core drilling . As GN has been one of the leading manufacture for small drilling mud tank unit in China , GN have had a very proffessional working team for international market .Please contact GN freely and we will surely give you the best solutions!

Share

written by GN Shale Shaker \\ tags: , , ,


2 Responses to “Drilling Mud Tank Unit”

  1. 1. Paul Beagley Says:

    I am looking at a system that may be able to assist me with drill mud management.

    I am currently operating a system ( self developed ) that is supporting 10 drill rigs , these rigs a producing drilling tailings from both chipping & coreing approx 50,000lts of drill mud per day 7 days per week.

    The % solids that are delivered to my area is approx 20 % and has various additives in the mud ( 650 & liquipol )

    What i am currently doing is pumping the drill mud over a self made shaker to remove 2mmsolids + and sending the 2mm- into a centrifuge unit for solid seperation.

    Can you assit with some advice as to how to stream line this process , and supply equipment to facilitate this works.

  2. 2. food waste disposer Says:

    Heya i am for the primary time here. I came across this board and I in finding It truly useful & it helped me out much. I hope to present something back and aid others like you aided me.

Leave a Reply