Dec 12

Recently, GN has produced for 2 different clients who worked for similar projects, with following equipment and solutions:
1. GN big bowl 22 inch diameter decanter centrifuges.
2. GN chemical dosing unit
3. GN standard containers.


GN has been providing this design for many years, and the technology is quite mature:
1. GNDU2000 Chemical dosing unit. GN has been providing the chemical dosing unit or so called the dewatering unit for many years, since some of GN clients are using GN centrifuges as dewatering centrifuges and prefer GN to make compact design for them. A chemical dosing unit is used to treat the material by some chemical methods, for example, to add some material to reduce the viscosity of material, or to flocculate the extra fine particles into larger ones, which are suitable for centrifuge use.
2. GNLW553C-VFD decanter centrifuge is a big bowl decanter centrifuge with a treating capacity up t to 90 cbm per hour, and the rotating speed could reach 3000 rpm. It is quite suitable for drilling liquid management, especially being used together with chemical dosing system. Normally, the centrifuge treating capacity for material after flocculation would be greatly reduced, that’s why a big bowl centrifuge with a large treating capacity is always used for this application.
3. 20 ft containers for housing the centrifuge and chemical dosing system, which is quite popular design. For one thing, it is more convenient and easy to transport the system when the main equipment are in standard containers. Secondly, the containers give a shield to the equipment, providing a suitable temperature and clean condition. Thirdly, the 2 sets of 20 ft containers could be put one under another, in this way, less room to be occupied.
In this design, GN engineers designed the round shaped ladders for the upper located container with the big bowl decanter centrifuge, when transporting, the ladder could be put into the container.


written by shale shaker \\ tags: , ,

Leave a Reply