Jun 21

We have stock over 10 sets Vertical cuttings dryer in stock for sale from last year. As the going down crude oil price, quite a few drilling rigs stop working and the requirements for solids control equipment and drilling waste management equipment reduce a lot subsequently. To clear the stock equipment, the vertical cuttings dryer is on sale now.

 

Vertical cuttings dryer is key equipment for drilling waste management, which can be installed in on shore rig site, offshore rig site, drilling waste management station workshop, mud plant etc. The vertical cuttings dryer can treat the drilling waste liquid containing particles around some hundred microns. It mainly used to treat the drilling cuttings waste discharged from shale shaker, some hundred microns cuttings inside the drilling waste. For the drilling waste discharged from mud cleaner or decanter centrifuge, the vertical cuttings dryer cannot treat that. Because the vertical cuttings dryer screen basket opening have 0.5mm, 0.35mm and 0.25mm for available, that means 500microns, 350microns and 250microns. If the solids in the drilling waste is smaller than 500microns, the treating capacity of vertical cuttings dryer will not that good. This means nothing can be separated by vertical cuttings dryer.

2015.12.02_vertical_cuttings_dryer

Draw a conclusion: pls don’t feed drilling waste discharge from mud cleaner and centrifuge to vertical cuttings dryer, you can get nothing and just block the screen basket opening.

 

GN Solids Control vertical cuttings dryer have been working for the oil drilling field for over 3 years. The stable working performance, lower maintenance cost and easy operation give good reputation for the unit.

 

Except for the vertical cuttings dryer, the client generally need decanter centrifuge working together after the vertical cuttings dryer. The high speed decanter centrifuge with 3200RPM bowl speed can separate the fine solids from the drilling mud, thus to lower down the mud gravity and mud density. After decanter centrifuge, the clean drilling mud can go back to active mud tank system for reuse.

Share

written by GN Shale Shaker

One Ping to “GN Solids Control Vertical cuttings dryer on sale”

  1. The oil and gas industry future trend-automation and digital Says:

    […] including its shale shaker, desander, desilter, mud cleaner, decanter centrifuge, mud agitator, cuttings dryer  and some other equipment and parts. GN solids control can manufacture the most advanced solid control […]


Leave a Reply