Dec 01

Shale shaker is high efficiency shaker. It is designed according to users’ actual demand based on modern technique and principle. GN Shaker takes advantage of double vibration motors in-phase principle. It holding ideal design on structure, and work steadily, operated lasting time without any problem, take rather little cost on maintenance. If choose proper model or parameters, it can work for many kinds of drilling fluid solids control. It is an ideal solution for Oil and gas drilling, HDD, Metallurgy, mining tail mud solids control

Operation 1: Shaker Screen Selection

Shale shaker can fix different meshes screen. This equipment can use 10-200mesh screen. Usually, when the shale shaker is first stage solids control equipment the shaker screen can be 30-100mesh. When the shale shaker is a part of mud cleaner, the screen can be 80-200mesh. Shaker screen selection can among manufacturer engineer, user, and contractor discussion. Replacement screen should be selected specially from manufacturer

Operation 2: Replace Shaker Screen

To make screen installation and uninstall more easy, GN shaker designed fast installation structure. The structure is a special type use tension wedge to fix screen. The structure including shelve strip, wedge. The first screen installation, we should inspect the screen dimension, such as 1250±2mm, the tolerance can’t over it. After fixed rubber strip, then put screen, shelve strip from shaker back (drilling fluid input), and push wedge evenly on two sides use hammer to push or tension wedges, make two sides identical. Tension each screens subsequently.

Operation 3: Shaker Deck Angle Adjustment

Shale shaker output angle adjustment can be operated under running and off. When finish the shaker deliver it, the shaker deck is 0°. When user operate shaker, according to drilling mud property and flow rate on job site, and adopts same screen, the angle is higher, the treating performance will be better while treating capacity will be higher. When drilling fluid is leaking on shaker deck, increase deck angle can get rid of fluid flow away.

Please contact GN Solids Control for inquiry freely


written by GN Shale Shaker \\ tags: , , , ,

One Ping to “Oilfeild Shale Shaker Operation”

  1. Top 5 Shale Shaker Manufacturer in World | GN Nodig Mud Recycling System Says:

    […] Shale shaker is the first phase cleaning equipment for a solids control system. GN Solids Control is one of the TOP 5 manufacturers for oil feild shale shaker. […]

Leave a Reply