Oct 27

Last week, one international contactor for mining industry started their project in Australia, among the separation line, two green colored equipment were significantly shown. They are big bowl centrifuges from GN Solids Control, a leading manufacturer for industrial separating equipment manufacturer based in China.

GN Solids Control has been designing and producing the separating equipment like shale shakers, mud cleaners, decanter centrifuges, vertical cuttings dryers for many years. At first, the equipment are mainly used for the oil and gas drilling solids control systems, and later, as GN’s quickly increasing development of technology and producing capability, GN Solids Control has enlarged its centrifuge model range from 14 inch bowl to bigger ones and smaller ones. Those 2 sets of GNLW764A decanter centrifuges are till now the biggest sized centrifuges made by GN Solids Control, with a bowl diameter of 30 inch and a treating capacity up to 120cbm/hr.

Besides the giant bowl decanter centrifuge GNLW764A-VFD, GN Solids Control has various centrifuge models with size as small as 9 inch diameter bowl, up to 30 inch diameter bowl, including the 14 inch bowl , 18 inch bowl, 22 inch bowl and etc.

GNLW764

For each size, there are different models available per different bowl length diameter ratios. Normally the comparably longer bowl a centrifuge has, a cleaner separation result it could give. Among GNLW series decanter centrifuges, take the 18 inch bowl diameter as example, there are different ratios like 2, 3 and 4. GNLW452 is a stout shaped decanter centrifuge with middle speed and shorter bowl, which is mostly used for barite recovery in a solids control system based on the barite size and gravity. GNLW453 is a high speed centrifuge for waste management systems, or as the dewatering centrifuge, for fine particles. While the GNLW454 is quite suitable for waste water separation with a longer bowl up to 4 times of bowl diameter, around 61 inches.

GNLW764, the 30 inch bowl diameter centrifuge has a bowl length-diameter up to 4. And this giant could separate quite fine particles at a large capacity, even after a dewatering unit.

Share

written by shale shaker \\ tags: , ,

Jan 16

GN Solids Control is one of the leading brands for solids control and waste management system, and second to none ranks among Chinese manufacturers in this industry. A lot of worldwide famous oil companies and oil drilling companies are using GN equipment and comprehensive solutions, including SINOPEC, CNPC and COSL. Recently, GN delivered main equipment for 2 sets of drilling cuttings waste management systems for CNPC.

GN BIG BOWL CENTRIFUGE FOR CNPC

Drilling cuttings are solids discharge from the drilling rig solids controls system, from the shakers, desander and desilters. After the solids control system’s first 3 phases separating, the drilling fluids are returned back to the system without the solids particle. But the separated-out particles are still too wet. For one thing, it is a waste for valuable drilling fluid. Secondly, it could damage to the environment if disposed directly. That’s why it is not only necessary but also mandatory to do some further treatment for the drilling cuttings.
GN Solids Control has zero discharge solutions for both WBM and OBM. And this order, combining the vertical cuttings dryer and decanter centrifuge, is for the oil based mud. A vertical cuttings dryer is specially designed for the oil based mud separation. GNCD930 series vertical cuttings dryers could dry the drilling cuttings to reach OOC value to 5%. The vertical cuttings dryer is running as the drying step of a washing machine. The vertical cuttings dryer is equipped with a screen basket with certain mesh number. Fluids pass the mesh and collected, while cuttings are stopped by mesh and falls down.
GNLW series decanter centrifuges with VFD control panels are used after the vertical cuttings dryer to remove the particles from 2 to 5 microns from the liquid. Most common model is GNLW363CG-VFD, a medium sized centrifuge with a high rotating speed. But for bigger treating capacity, GN has GNLW453C-VFD and GNLW553-VFD available, both of high rotating speed while bowl sizes are respectively 18 inch and 22 inch. In this project, clients chose GNLW453C-VFD.
Pls contact GN for more information.

Share

written by shale shaker \\ tags: , , , ,