Sep 09

GN Solids Control is a world famous company and brand in the solids control and drilling waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge,  shear pump, cutting dryer, vacuum degasser, Mud Gas Separator  and so on. GN could be your one stop shop in the solids control and waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two more naming rules to you, agitator and mud gun. As these two products are widely used in the mud mixing system in the oil and gas drilling, there are more and more customers showing their interest in them. So understanding the naming rules is very important and could help you select the products effectively and efficiently. Let’s start with the agitator: GNJBQ075CD, GN means the company name in short. JBQ means theChines product name of the agitator in short. 075 means 10 times of the pump’s power. The pump power is 7.5KW.C means this product is the third generation, and in future, GN will make more upgrades and improvements for the pump, there will be D, E etc. and more versions coming out. D means there are two impellers on the shaft, this is specially used when the tank is too deep and the shaft needs to be long, and the impeller quantity needs to be doubled to make the mud even.

GN products

GN products

Next let’s go to the mud gun: GNNJQ50A-3G(X), GN means the company name in short, NJQ means the product name mud gun in short.50 means the nominal diameter is 50mm. A means it is the first generation. 3 means there are 3 nozzles on the mud gun. G means it’s fixed, X means it’s rotatory. Mud gun is widely used in the mud system to spray and flush the corner of the tank to avoid the solid collected in there.

That’s the basic introduction of the naming rules foragitator and mud gun. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

Share

written by GN Shale Shaker \\ tags: , , , , ,

Aug 19

GN Solids Control is a world famous company and brand in the solids control and drilling waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on. GN could be your one stop shop in the solids control and drilling  waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two naming rules to you, the vertical cutting dryer and the centrifugal pump. As these two products are widely used in the industry and they are the core products of GN’s products line, there are more and more customers showing their interest in this two products. So understanding the naming rules could help you identify the products effectively and efficiently. Let’s start with the cutting dryer: GNCD930C-VFD, GN means the company name in short. CD means the product name cutting dryer in short. 930 means the maximum diameter of the screen basket is 930 mm. C means this product is the third generation with more improvement than the previous two generations. VFD means variable frequency drive. This feature can make the operator change the speed of the screen basket and rotor according to the volume of the slurry.

GN products

Next let’s go to the centrifugal pump: GNSB8*6A-13J,  GN mean the company name in short, SB means the product name centrifugal pump, 8*6 means the inlet size is 8 and the outlet size is 6, A means it is the first generation of centrifugal pump. 13 means the impeller size. J means the pump is mechanically sealed. And there is another way for sealing, packing. There will be no indication if it’s that way sealed.

That’s the basic introduction of the naming rules for vertical cutting dryer and centrifugal pump. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

 

Share

written by GN Shale Shaker \\ tags: , , , , , , ,

Aug 16

GN Solids Control is foremost manufacturer from China specialized in spend management equipment and system. GN Solids Control (US brand GN Solids America) owns a good name inside worldwide for drilling waste management equipment. It is located in Beijing China and Harrisburg, USA. It is mainly stated in China but joint technological know-how with U. S major company.
GN Solids Control promoted drilling cuttings renforcement unit for some years. And still have rich experience on style and design and manufacturing drilling cuttings solidification unit. GN maintains upgrading the design to make it ideal for more applications and more user friendly.
Main applications of drilling cuttings solidification unit

160723-Solidification-unit-2
1) From this article you can see from the name, a drilling cuttings solidification unit is used to treat the drilling cuttings from oil and gas drilling field. It can treat often the cuttings from high H shale shaker, from usable cuttings dryer, from drilling waste high speed centrifuge
2) There is also some clients use the drilling cuttings renforcement unit for cuttings via solids control shale shaker, desander, desilter, decanter centrifuge. As the fluids contend can be regular higher in this kind of cuttings, more cement or substances may be used to make the cuttings dryer
3) There is also some customer want to use to the drilling cuttings solidification unit for drilling mud or drilling liquids, or the sludges in mud pit or waste abyss. This application is not advised from GN Solids Control. As the fluids content is quite high in these conditions, it really is normal very flowable. First of all, the drilling cuttings renforcement unit utilize screw conveyer to transfer the cuttings, these materials with a lot higher fluids, it is not easy regarding auger transfer. Secondly, an increased content of cement and also chemical should be added to the particular system in order to get a just simply relative dryer condition.
Because the drilling cuttings solidification product is mainly used to treat the particular drilling cuttings, it is generally together with below equipment:
1) High G drying shaker
2) Vertical cuttings dryer
3) High speed decanter centrifuge

Share

written by GN Shale Shaker \\ tags: , , ,

Aug 05

GN Solids Control is China leading model for solids control gear & drilling waste management equipment, we have been committed to this particular oil drilling field for nearly 10 years and we accumulate wealthy production experience on the connected equipment production and abundant experience on the solution regarding clients’ requirements. GN Solids Control have been supplying products to over 60 countries inside the worlds, from East international locations to middle east nations to Europe countries for you to West countries.

GN Solids Control shaker screen is likewise very popular as the high quality and far lower price. GN Solids Control can offer replacement shaker screen for below brand shale shakers:
1) Replacement shaker screen for Swaco Mongoose shale shaker
2) Replacing shaker screen for Derrick FLC 500 / FLC 2000 shale shaker
3) Replacement shaker screen regarding NOV Brandt King cobra shale shaker.
Just a few weeks back, we got one big shaker screen order from center east clients. He is the old clients. In season of 2014, this clientele buy almost 1000pcs Mongoose shaker replacement screen via us, and in year involving 2015, he bought practically 500pcs Derrick shaker substitute screen from GN, this year also, he bought almost 700pcs NOV brandt king cobra replacement shaker screen & Mongoose replacement screen and many replacement screen for Scomi shale shaker.

GN screens on GN shaker

GN screens

Our shaker screen have some advantages seeing that below:
1 . The life span can prolong to with regards to 300hours, much longer use period than other China brand as well as US brand shaker screen.
2 . API RP13C screen mesh, equivalent to US brand name shaker screen
3. In case the clients give big purchase for shaker screen, you can offer some shale shaker, mud cleaner, or some other solids control equipment totally free.
4. We have some share screen in USA, within Russia for fast shipping and delivery.
5. Except for shaker screen, we have much perfect development line for other solids control equipment, and we possess much better brand recognition intended for decanter centrifuge.

Share

written by GN Shale Shaker \\ tags: , , , ,

Jul 05

GN solids control can be a specialized manufacturer for drilling rig solids control system and mud mixing system , we provide the solids control accessories and spare parts. We can source spare parts not only for our unique equipments, but also for US company solids control equipments in oil along with gas drilling industry, HDD and construction industry.
The actual replacement spare parts GN can certainly supply including:
Mission 300 series or Magnum pump spare pump
Replacement shaker screens for Derrick, Brandt, Swaco shale shaker and mud cleaners
Replacement hydrocyclones with regard to mud cleaner

GN new factory for centrifuge
Other parts needed by the customers.
Especially for Assignment pump spare parts, since we all has introduced production line to provide centrifugal pump by our very own factory, the price could be really competitive compared with the INDUSTRY spare parts.
For shale shaker, we can provide all types of shaker screens, including steel structure screens, composite material projection screens, hook strip shaker monitors, with stainless steel wire fine mesh. We provide option for the clients with 2 layers cable mesh, 3 layers in addition to 4 layers wire fine mesh.
GN shaker screens continues to be tested and approved by a great deal of professional and big clients in this particular industry with their good responses for the working life and gratification, our screens are permitted as high cost-performance rate replacement shaker screens.
Aside from the spare parts, we mainly provide the complete line of mud tank system with solids control equipments, like shale shaker, mud cleaner, desander, shear pump, desilter, decanter centrifuge , vacuum degasser, poor son degasser, Mud Gas Separator, mud gun, mud hopper, jet shearing device, and so on
We also paied the attention on the drilling squander management industry, which is the new development for oil drilling industry, to be a responsible company to the environment has become the necessary purchase.
If you need drilling rig replacement components or solids control spare parts, drilling cuttings treatment gadgets, pls contact with GN.

Share

written by GN Shale Shaker \\ tags: , , , , , ,

Jun 27

Liquid Mud Plant
Typically the liquid mud plant is perfect for storage of drilling liquids. The mud plant comprise of mud tanks, mud agitators, shear pump and mud guns intended for storage and agitation on the drilling fluids. And usually, the mud plant could have one shale shaker and something decanter centrifuge pre-treatment with the drilling mud before maintaining it to the clean drilling fluids storage tanks. The whole mud tanks quantity can depends on the volume of the water mud pant.

Drilling Waste material Management Module
GN design and style a complete line of individual elements for drilling waste management, this include vertical cuttings dryer module, decanter centrifuge module, High Drying shaker module, drilling cuttings move module, cutting collection pack, drilling mud transfer component. This components can be linked with each other to be a complete drilling waste management system. It is extremely flexible and easy for transport.
GN Shale America
New developed drilling mud treatment equipment:
Dewatering system is chemically enhanced technological innovation to treat drilling fluids using Ultra fine solids to regain it to be a closed loop mud system with Zero discharge.
Drilling cuttings solidification unit, this really is one of the treatment unit with regard to Oil based and water dependent mud in an economic approach, it is also called drilling cuttings stabilization unit.
Thermal desorption unit is way to make use of heat up to over 400 M degrees to treat the oil-based drilling cuttings with oblique thermal desorption unit, right after treatment the vapor will likely be condensed to be clean essential oil and water, the solids will have only 0. 3% oil on the solids intended for discharge or construction stuff.

There are a lot of reasons for you to Pick GN Solids Control. Since the first and big solids control company from China, GN Solids America is able to provide you the quality drilling mud treatment products for you drilling solids control and drilling waste management equipment.

Share

written by GN Shale Shaker \\ tags: , , , , ,