Aug 19

GN Solids Control is a world famous company and brand in the solids control and drilling waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on. GN could be your one stop shop in the solids control and drilling  waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two naming rules to you, the vertical cutting dryer and the centrifugal pump. As these two products are widely used in the industry and they are the core products of GN’s products line, there are more and more customers showing their interest in this two products. So understanding the naming rules could help you identify the products effectively and efficiently. Let’s start with the cutting dryer: GNCD930C-VFD, GN means the company name in short. CD means the product name cutting dryer in short. 930 means the maximum diameter of the screen basket is 930 mm. C means this product is the third generation with more improvement than the previous two generations. VFD means variable frequency drive. This feature can make the operator change the speed of the screen basket and rotor according to the volume of the slurry.

GN products

Next let’s go to the centrifugal pump: GNSB8*6A-13J,  GN mean the company name in short, SB means the product name centrifugal pump, 8*6 means the inlet size is 8 and the outlet size is 6, A means it is the first generation of centrifugal pump. 13 means the impeller size. J means the pump is mechanically sealed. And there is another way for sealing, packing. There will be no indication if it’s that way sealed.

That’s the basic introduction of the naming rules for vertical cutting dryer and centrifugal pump. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

 

Share

written by GN Shale Shaker \\ tags: , , , , , , ,

Nov 26

GN Solids Control delivery just one sets standard 500gpm mud system- GNMS-500GL to home-based client on May 25th, 2015. This mud system previously worked for over 3 tasks. Our engineer gives teaching on the installation & examination, taking back valuable construction site data. The client is much content with GN compact mud system.
Below pic is GNMS-500GL mud recycling system performing at HDD jobsite. Often the mud system including shale shaker, mud cleaner, mud agitator, centrifugal pump, mud hopper, mud tank and so on For details, pls visit our web site from GNMS-500GL mud taking system for HDD Trenchless Project
1) Which spot can GN compact mud system be used for?
GN Solids Control is China foremost manufacturer for HDD/CBM mud recycling system. The system can be used for:
• HDD trenchless project
CBM drilling as well as geothermal drilling project
• TBM or bored pile job
• Diamond drilling or h2o well drilling project
The compact mud system is usually widely used in Australia, Completely new Zealand, Singapore, Mongolia, Dalam negeri, Myanmar, Korea, UAE, Kuwait, Egypt, Sudan, South Africa, Sth America, etc .

CNPC jobsite waste management centrifuge
2) Apart from compact mud system, that which equipment can GN present?
For GN Company, through 70% of sales total is from oil and gas drilling. We can give below equipment & soultion
A) Total solution to get oil & gas drilling mud system, like 1000gpm mud system /1500gpm mud system.
B) Total remedy for drilling waste management, from first step to final one:
Step 1: High H shaker / vertical cuttings dryer to treat the going cuttings discharged from shale shaker
Step 2: waste management Decanter centrifuge to treat the actual fluids recovered from Large G shaker / up and down cuttings dryer.
Step 3: Arctic desorption unit to treat the particular drilling waste ( solids part) discharged from up and down cuttings dryer.
Step 4: Following TDU treatment, the squander can be made into bricks regarding construction industry.
For drinking water based mud, we can offer you cuttings solidification unit to blend the cuttings with chemical substances & cement, making it zero harmful to environment.
C) Solids control centrifuge is also important equipment. We can offer dangerously fast centrifuge for fine solids separation, middle speed centrifuge for barite recovery, significant bowl big volume centrifuge for fast reducing mud weight.
If you need some help support, pls feel from to make contact with us- GN Solids Control sales team. You can get most professional estimate and technical support from here.

Share

written by GN Shale Shaker \\ tags: , , ,

Sep 06

GN Solids Control has just come back from the Australia No Dig Down Under show with great success. The exhibition is held in Sydney from Spetember 1-4th, 2013 . GN Solids Control brought a compact mud system for HDD this year.

The system is a HDD mud system has a treating capacity of 150GPM, minimum separation point can reach 15-20 microns by using a double deck shale shaker with 4 inch hydrocyclones. The system also  has a mixing hopper installed on the tank. The tank’s holding capacity is 5000 Liters. It’s a simple tight mud system with all necessary functions to meet your demands on HDD project. In Australian market we have exported a great number of such systems with different treating capacity.  We also have trailer mounted and hydraulic jack up systems available for easy transportation.

GN Solids Control received many valuable inquiries on the show from both old and new customers.  Many customers raised up their specific requests. GN talked with customers deeply and many customers express their intent to cooperate with GN.  GN’s products are exported to over 60 counties and regions with high quality and competitive price.  GN Solids Control attend Australia No Dig Down Under show every year. Hope to meet you next year. Please do feel free to contact us for GN world wide exhibitions.

Share

written by GN Shale Shaker \\ tags: , , , ,

Jul 20

Hebei GN Solids Control Co., Ltd won great success on OTC and Mosco show this year abroad. Not too long ago, the 150GPM HDD mud recycling system has just been delivered to Australia for Australia No Dig exhibition in September. Hope GN could also win great sucess in this exhibition.

This 150GMP HDD mud system has a treating capacity of 150GPM, minimum separation point can reach 15-20 microns with a double deck shale shaker. The system has mixing hopper installed on the tank. The tank’s holding capacity is 5000 Liters. It’s a simple tight mud system with all necessary functions to meet your demands on HDD project.

GN Solids Control  manufactures complete equipment for HDD (Horizontal Directional Drilling ) mud recycling system of : 150GPM / 350GPM / 500GPM / 1000GPM / 1500GPM /2000GPM.  Our small tight mud systems are warmly welcome in HDD industry all over the world. In Australian market we have exported a number of such systems with different treating capacity.  We have trailer mounted and hydraulic jack up systems available for easy transportation.

This 150GPM HDD mud system will meet customers in Australia September and now it’s ready for sale. GN Solids Control welcome you come and check it on the show. If you are interested to get this system please do feel free to contact us for more info.

Share

written by GN Shale Shaker \\ tags: , , , ,

May 02

GN deliveried 1 unit 1000GPM mud recycling system to Australia this week for Horizontal Directional Drilling(HDD). Unlike new suppliers to Australia, GN know their regulation/electrical requirement/safety requirement very well.

GN mud recycling system advantage:

1)       Very compact design with recycling and mixing faction

2)       All equipment and attachment stay on tank while moving from jobsite to jobsite

3)       Top quality to meet Australia requirement on electrical and safety

4)       Spare parts and service available in Australia

Other industry for GN mud system

1)       Oil and Gas drilling mud recycling and storage mud system. It always including 2 or more tankds for a complete package for work over rig or drilling rig from 350HP to 2000HP rig

2)       Coal Bed Methan drilling mud recycling system always contains only 1 tank or 2 tanks which is similar with HDD mud system but will be more strict on electrical

3)       TBM drilling always include 1 or 2 tanks with huge mud capacity but lower requirement on treating quality and lower requirement on electrical

4)       Other mining industries

GN Solids Control is a professional supplier and manufacture on mud recycling system for shakers, decanter centrifuge, pumps, agitators, etc. Please contact GN Solids Control freely by inquries.

Share

written by GN Shale Shaker \\ tags: , ,

Nov 26

GN150GPM mud recycling system has be improved to be more impact for fast moving. GN Solids Control has been working for drilling mud recycling system for 5 years and have a separate devision for Horizontal Directional Drilling rig.

GN150GPM mud system configuration

1) GNYS852 shale shaker with 4 no desilter cyclone
2) SLH100-25 jet mud mixer for mixing mud
3) 5m long mud tank with compact design including mud recycling and mixing fuction
4) 1 set mud gun and tank attachment

Superiority of GN150GPM mud system

1) It’s very compact design and equipment will stay on tank while travelling, walk way and handrail will be folded on tank side within Australia Road Regulation
2) Max treating capacity reaches to 200GPM
3) This is a mud recycling and mixing combination system which is defference with other brand mud system may only recycling or mixing
4) Reasonable price compared with US equipment and top configuration for 150GPM capacity

GN have been sales to Australia for 150GPM mud system as well as other size like 500GPM or 100GPM standard modle.HDD drilling mud system is one of a leading industry for Australia drilling which will meet GN production area very much. Please contact GN Solids Control freely for inqury.

Share

written by GN Shale Shaker \\ tags: , , ,