Dec 29

GN Solids Control is a professional solids control equipment manufacturer. In the drilling waste management area, GN has 3 typical products for the disposal treatment. They are decanting centrifuge, vertical cuttings dryer and Hi G shale shaker.

No well can be drilled without the generation of wastes. The types of waste generated include drill cuttings, waste water, spent drilling fluids, completion fluids and filtration wastes. The contaminants on the waste depend largely on the types of drilling fluids used to drill the well. With increasing legislation, public awareness and minimum operator environmental standards, the containment, handling and treatment of drilling waste has increased in importance and now ranks in importance along side that of drilling fluids in many countries around the world.

The treatment processes utilised on the waste generated vary from c ountry to country and very much depend on the local legislation. In countries where no legislation exists, many operators will fall back on minimum standards used in other countries or standards set at a corporate level.

GN Vertical Cutting Dryer is one of the popular products for OBM and SBM. The H-I G Dryer Shaker,and Dewatering Centrifuges,Big Bowl Big Volume decanter centrifuge availalble for drilling waste management and solids control. The Hi G shaker is for water based mud.

GN Solids Control keeps developing equipment for drilling waste management. Centrifuges and Hi G shale shaker is widely used all over the world now. The vertical cuttings dryer is penetrating into the world market very fast. GN will continuously provide customers with high quality equipments.


written by GN Shale Shaker \\ tags: , , , , ,

Apr 17

GN Solids Control is the leading manufacture in China for solids control equipment, drilling waste management system is the new industy and few of China manufacturers build equipment for drilling wastement management equipment till now. Hi-G shaker is one of the equipment for drilling waste management system.

GNZS853 Hi-G Dryer Shaker main specification

1) Single deck

2) GNZS853 is linear motion

3) Treating Capacity: 615GPM

4) Vibrating Strengh: 7.0 G

5) Screen Area: 3.2 square meters

GNZS853 compared with GNZS634 Hi-G dryer shaker.

1) GNZS853 is 3 –panel hi-G dryer, its screen area is larger than the GNZS634 4-panel hi-G dryer. The larger the screen area is, the dryer the cutting is. Total deck screen length is 2550mm, the total deck screen length of GNZS63-4 is 2520mm. Total screen area of GNZS85-3 is 3.2m2, but the total screen area of GNZS63-4 is only 3.15m2. And GNZS85-3’s screen area and total deck length is larger than Derrick 4-panle shale shaker/mud cleaner. So 4-panel shaker is not must be better than 3-panel shaker.

2) GN screen is frame type, the less deck , the more active screen it have. So the 3 deck screen will have more pocent of active screen area.

GN Solids Control also provide other drilling waste management equipment like Vertical Cutting Dryer and Decanter Centrifuge. Please contact us freely


written by GN Shale Shaker \\ tags: , ,

Mar 31

Drilling waste management is getting more and more popular and many companies started to work this area like MI-SWACO , Weatherford,SCOMI.

The worlds leading oil feild service company started to working on this area as market is growning very fast. Seldom China manufactures produce related equipment till now. GN Solids Control is the the leading manufacture in China to start drilling waste management sysytem to recycling drilling cuttings. It includings Vertical Cutting Dryer, H-G Dryer Shaker, Decanter Centrifuge.

Vertical Cutting Dryer

The vertical cutting dryer is adopted behind the rig solids control system. This allows the shale shakers to be run with better screens, resulting in increased drill solids removal efficiency. Increased drilling solids removal efficiency saves significant dilution costs, reduces drilling days, and aimed in substantially lowering hole problem costs, fines penetration into producing sands, etc

Hi-G Dryer Shaker  

GN new products hi-G dryer GNZS85-3 is designed to replace the old model hi-G dryer GNZS63-4. GN Hi-G dryer shaker is with long shaker deck big capacity which is used for waste management to treat the drilling cuttings from the primary solids control equipments, like shale shaker, desander, desilter to dry the solids for transportation, and make the fluids easier for future treatment. To know more info of primary solids control equipments, pls check GN website.

Decanter Centrifuge

Industrial decanter centrifuges are wildely used In oilfield drilling fluids solids control systems.It is used after the mud cleaner or desander desilter for seprating drilling cuttings.We are A China based oilfield industrial decanter centrifuge manufacturer. On the drilling waste management area, decanter centrifuge will working after Hi-G dryer shaker or vertical cutting dryer.

GN Solids Control is the leading manufacture for waste management system. Please contact us freely


written by GN Shale Shaker \\ tags: , ,