Dec 16

GN solids control provide sell and rental service of solids control equipments in the whole States, our warehouse based on 6710 windfern road, Houston, TX77040, we have linear motion shale shaker, linear motion mud conditioner, high speed decanter centrifuge, variable speed decanter centrifuge, vertical cuttngs dryer, mixing hopper, slurry pumps, shaker screens in stock, pls give us a call at 713 320 3868 to check the availability of solids control equipments and inspect our equipments in Houston.

The products line GN solids America provide including the list below:

1 Drilling cuttings waste management system & equipments: vertical-G dryer, high volume decanter centrifuge, hi-G dryer, screw conveyor system to transport the drill cuttings from the solids control equipments to waste management system, and we provide customized design after checking your rig site.

The centrifuge models available including: GNLW223 series, GNLW363VFD & GNLW363-BG, GNLW553VFD. If you choose our rated speed decanter centrifuge, and you have to use different bowl speed sometimes, GN will provide extra one pulley with different speed as back-up. And one botton start/stop type control cabinet for centrifuge is available now for easy operation; If you choose our VFD decanter centrifuge, you need to prepare for a vacuum unit in your rig site because the VFD control cabinet is positive presurrized with PLC control, screen touch, and full of stainless steel material.

2 Solids control system & Equipments: linear motion shale shaker with 4-panel pre-tentioned screens, decanter centrifuge( both rated speed and variable speed for option), mud cleaner with 1000 gallons per minute treating capacity, with 2pcs of desander cone, 12pcs of desilter cone installed on top of the shale shaker, back-up as shale shaker in some solids control system; shaker screens from API60 to API230 available for replacement screens.

3 Mining diamond core drilling equipments & solids removal unit: GNLW223 decanter centrifuge and 2-panel shale shaker GNZS752

Pls contact with GN solids America for details.

Solids Control System 5

Share

written by GN Shale Shaker \\ tags: , , , , ,

May 18

No well can be drilled without the generation of drilling wastes. The types of waste generated include drill cuttings, waste water, spent drilling fluids, completion fluids and filtration wastes. The contaminants on the waste depend largely on the types of drilling fluids used to drill the well.

The Four R’s are one of many ways to describe the waste management hierarchy approach and are important when considering what our drilling waste management product line consist of. The four R’s are:

Reduce of Drilling Waste

if we do not generate the waste in the first place, then a reduction is obvious. However, no well can be drilled without the generation of waste. It is possible though to reduce the volumes through a number of means including better planning, a reduction in hole sizes, minimizing washout through the selection of appropriate drilling fluids etc.

Reuse of Drilling Waste

solids control equipment is key to the reuse strategy. Solids control efficiencies will dictate how much drilling fluid is recovered in a suitable state for reuse in further drillings activities. Poor solids control efficiencies will lead to more solids entering the active system, further reducing their particle size, and ultimately resulting in the requirement to dump fluids as waste, or to dilute, thereby increasing volumes and costs, all of which have a negative environmental impact.

Recycle of Drilling Waste

after recovery of the drilling fluid for reuse, the drill cuttings may require further processing. The low temperature thermal treatment of NADF cuttings offers the opportunity to recycle the recovered base oil to build new drilling fluids.

Recover of Drilling Waste

high temperature thermal treatment of drill cuttings will generate a recovered hydrocarbon which is not suitable for reuse in drilling fluids due to “cracking” of the oil caused by the higher treatment temperature. However, this hydrocarbon is often suitable for recovery as a fuel oil.

GN Solids Control is a professional supplier to offer drilling waste management equipments, please contact GN Solids for inquiry freely

Share

written by GN Shale Shaker \\ tags: , , , ,

May 03

At the CIPPE drilling show in March , GN show a total solids control system there . A turkey clients signed contact after the show on the spot for a ZJ40 solids control system and choose all GN shown equipments to combination a total solids control system in Turkey.

Here is the details of solids control equipments which was ordered by this Turkey clients:

1) 2 sets Shale Shaker GNPS703 for 660GPM capacity each
2) 1 set Mud Cleaner GNZJ703 for 1200GPM capacity
3) 1 set Vacuum Degasser ZCQ270 for 1200GPM capacity
4) 6 sets centrifugal pump SB8x6-13 for feeding cones and mixing
5) 2 sets mud hopper 750×750 for mixing and weighting drilling mud.
6) 6 sets mud gun NJQ50-3
7) Shaker screens and other spare parts

The tank was sold to a China clients and also they choose 2 units of same solids control system as the CIPPE drilling show. Each unit including :

1) 2 GNZS63-3 shale shaker for 518GPM capacity each
2) 1 GNZJ63-3 mud cleaner for 1000GPM capacity each
3) 2 sets of 45kw centrifugal pump to feed cones
4) 1 set of 7.5kw mud agitator for avoild silting
5) 1 set of GN jet mud mixer for mixing and weighting
6) 1 tank same size with CIPPE show 14mx2.6mx1.8m

At the same time , we received orders from other market like 2 unit of GN500GPM solids control system from Australia , 6 unit of solids control system equipments from China,3 sets of decanter centrifuge from Brazil, 1 sets of decanter centrifuge from Dubai and so on .
GN is becoming one of the leading manufacturer for solids control system in China. Wish they grown stronger and stronger to give solutions to all of their clients.

Share

written by GN Shale Shaker \\ tags: , ,