Oct 16

It is a common knowledge that in the solids control system for a drilling rig, no matter for the land rigs or for the offshores, the shale shaker plays the most important role for separating out the solids waste from the mud recycling unit, and it is also the shale shaker which waste the most of the liquid on the cuttings discharged from the shaker. That’s why, in many countries, there is a must to equip another drilling cuttings treatment system alongside the rig.
A drilling cuttings waste management system is used for further separation of the drilling waste discharged from the shale shaker and mud cleaner, most of which are from the shakers. For one thing, the drilling cuttings waste management system helps to dry the cuttings for later transportation, on the other hand, it increased the drilling liquid amount to be recycled. Both are saving money. In case of OBM mud, the operators always need a vertical cuttings dryer and a high speed decanter centrifuge, while for WBM mud, operators always use a high G drying shaker and a decanter centrifuge.
In some cases, the ViST Shaker screen device could replace the drilling cuttings waste management system, or at least to some degree, reduced the work for the cuttings separation works. Generally speaking, the ViST shaker screen device has following advantages:

ViST shaker device

1. It is suitable for both WBM and OBM mud in a solids control system.
2. It is a compact structure, and only use an air compressor as power source, and one set of ViST could serve up to 3 sets of shale shakers.
3. It is designed to be suitable for different shaker models.
4. In practice, it helps to save the liquid amount by 30% to 50%.
Now for GNZS703 and GNZS594 series shale shakers, there are ViST device for option.

Share

written by shale shaker \\ tags: , , ,

Jul 12

Just not long ago, GN Solids Control who owns are quite professional R&D team in solids control industry, has developed and got patented of a series of ViST Vacuum Shakers. It would be a new page of solids control industry, because the ViST vacuum shaker will greatly reduce the drilling cutting proportion and enhance the treating performance during solids control.
Here is the working video of GN ViST Vacuum Shaker.
Here are the main parameters of GN ViST vacuum shaker:
1. Pressure of air source: 0.7-1.0 Mpa, equal to 100 to 150 psi
2. Air consumption: 4.5 cbm/min, equal to 160CFM
3. Matching shaker quantity: 2 or 3 sets
4. Suitable mud: all types of mud including SBM, OBM and WBM
5. Mud recycling ratio: 30 to 50 percentage
6. Mud temperature from minus 15 degrees to 85 degrees centigrade
7. Control type: automatic pneumatic control
8. No electrical power needed

Features and advantages of GN ViST Vacuum Shaker:
1. Wide application for all mud type including WBM, OBM and SBM.
2. It is suitable for both land rigs and offshore rigs, to enhance the working efficiency of the shake shakers, to recycle the drilling fluid to the most while discharge the cuttings to the least.
3. A ViST shaker could replace the drying shaker at a lower cost comparing with drying shaker.
4. Small footprint, even no extra space needed when added onto existing shakers, which is very important for offshore conditions.
5. Easy for installation for both GN’s own shakers and other brands’ shakers.
6. By using a ViST devise, the solids control shale shaker can use shaker screens with larger API number without leaking, in order to enhance the treating efficiency.
7. By discharging dryer cuttings, it would be easier for transport or discharge the drilling cuttings.
8. Easy to be operated by one operator only.
For more information, welcome to contact GN Solids Control directly.

Share

written by shale shaker \\ tags: , , ,